Camburg Engineering
'07-21 Toyota Tundra Camburg X-Joint Upper Control Arms
'07-21 Toyota Tundra Camburg X-Joint Upper Control Arms
MCQUEEN
190 South McQueen Road
Suite 109
Gilbert AZ 85233
United States
Camburg's performance ball joint upper control arms for the 2007-2021 Toyota Tundra come with Camburg's X-Joint pre-installed along with Camburg's billet cap kit. These upper control arm kits are ready to bolt up out of the box.
Camburg's upper control arms are designed to work with aftermarket coilovers and increase wheel travel and suspension performance on your Toyota Tundra.
VEHICLE FITMENT:
2007-2021 2WD/4WD Toyota Tundra
KEY FEATURES:
- CNC bent tubes MIG welded
- Thicker .156″ wall round tubing
- Polyurethane frame pivot bushings with grease-able zerk fittings
- Camburg X-Joints pre-installed
- Billet aluminum covers
- Matte black powder-coating
- All necessary hardware included and ready to install
- Made in the USA in-house
- Designed for 1-3″ of lift
WHAT'S INCLUDED:
- Upper Arms
- Hardware Kit
- Billet X-Joint Covers
SPECS:
- Track Width: Stock
- Wheel Size: 17-20 in
- Max Backspacing: 6.00 in
- Tire Size: 33-35 in
TECH INFO:
- With so many variables of wheel size, offset/backspacing, tire size, brands and styles, the amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders and/or modify the body mount behind the front tires to eliminate tire rubbing.
- 20″ OEM wheels & tires and 18″ OEM wheels with larger tires than stock will not work with this suspension system “as is” and would require hub-centric wheel spacers.
KIT DETAILS:
Camburg developed the new Camburg X-Joint as an extreme performance, all-weather, all conditions, high angle ball-joint for our Camburg performance BJ upper control arms. These are much higher quality, considerably stronger and have an improved boot design that allows for higher angle use, better greasing and increased longevity. With higher strength heat-treated materials and an improved design, Camburg was able to vastly improve upon what was available on the market. These are fully sealed and perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. The dual lip seal design on the boot insures the outside elements don’t make their way in and contaminate the grease and joint.
The grease zerk fitting allows you to grease them on the truck without having to remove the boot. The Camburg X-Joint is designed specifically for our ball-joint upper arms for optimum fit and maximum wheel travel.
These arms gives many of the same benefits our uniball upper arms offer at a lower cost. The ball-joint arms also hold up better under wet harsh conditions compared to a uniball since it’s a sealed & greased joint. By building an upper arm to re-angle the ball-joint, you’re able to gain more wheel travel with extended length coilovers from Bilstein, FOX, King and Icon and keep the joint in its normal operating range. These arms also correct the suspension geometry by increasing much needed caster compared to stock arms which improves handling and allows for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the weaker stock stamped sheet metal arm.
we may have just the thing you're looking for
A-Pillar Light mounts to fit any light for most models of 4x4 trucks.
Switch Pro Panels to control all onboard lights and accessories.
Inexpensive ABS Guards that can save you from expensive repairs.
American-made Excellence
SDHQ: Built for Adventure
Experience American-made excellence from SDHQ, your fellow off-road enthusiasts. We take pride in crafting high-quality, custom products right at our headquarters for unparalleled performance and durability.
Check out what 'SDHQ Built' means for us as well as our customers:
